Product Introduction

This modular furry tail butt plug set combines a knotted silicone plug with a detachable 16.5-inch tail. Its two-part construction allows the knot plug and metal tail plug to be used separately or connected to create a complete fantasy tail plug.

The main silicone plug has a tapered tip followed by a rounded 1.65-inch knot. Its shaft leads into a T-shaped base that remains outside the body and provides an accessible area for handling and removal.

A prepared connection hole in the bottom of the T-shaped base holds the tapered metal plug attached to the furry tail. Insert the metal component into this opening to connect the two pieces, or remove it when you want to use the silicone knot plug without the tail.

Detachable Three-Way Design

The set can be configured in three ways:

• Wear the silicone knot butt plug without the tail
• Wear the furry tail using its attached metal tapered plug
• Insert the metal tail plug into the hole beneath the T-shaped base to create a complete knotted tail butt plug

This modular construction offers more flexibility than a tail permanently fixed to one plug. It also allows the silicone and metal components to be separated for cleaning and storage.

Three Knot Plug Styles

The knot butt plug is available in three visual styles.

The Pink Plug uses transparent silicone with a pink glass ball enclosed inside the knot. The glass sphere remains visible through the clear silicone and highlights the rounded knot structure.

The Purple Plug also uses transparent silicone but contains a purple glass ball inside the knot.

The Skin Plug is made with a solid skin-tone silicone body rather than transparent silicone and does not use the same visible glass-ball effect.

Pink and Yellow Furry Tails

The detachable furry tail is available in pink or yellow, with the exact combination determined by the selected product option. Each tail measures approximately 16.5 inches long and includes its own tapered metal plug at the upper end.

Four combinations are available: Pink Plug with Pink Tail, Purple Plug with Yellow Tail, Skin Plug with Pink Tail, and Skin Plug with Yellow Tail.

Key Features

• Modular furry tail butt plug set
• Detachable 16.5-inch furry tail
• Silicone plug with a tapered tip and rounded knot
• T-shaped base for handling and controlled removal
• Knot plug and metal tail plug can be used separately
• Four plug-and-tail combinations

Product Options

Pink Plug + Pink Tail

Transparent silicone knot plug with an enclosed pink glass ball, paired with a pink furry tail.

Purple Plug + Yellow Tail

Transparent silicone knot plug with an enclosed purple glass ball, paired with a yellow furry tail.

Skin Plug + Pink Tail

Solid skin-tone silicone knot plug paired with a pink furry tail.

Skin Plug + Yellow Tail

Solid skin-tone silicone knot plug paired with a yellow furry tail.

Size Details

Knot Butt Plug Total Length: 4.48 in
Knot Width: 1.65 in
Furry Tail Length: 16.5 in
Tail Colors: Pink or yellow

How to Assemble the Tail Butt Plug

Clean and dry both pieces before assembly. Hold the silicone knot plug by its T-shaped base and locate the prepared hole on the bottom.

Align the metal tapered plug attached to the furry tail with the connection hole. Insert it gradually until it sits securely inside the base. Check the connection by holding the silicone base and gently pulling the tail before use.

Do not force the metal component into the hole at an angle. Stop if the silicone stretches excessively, tears, or does not hold the tail securely.

To detach the tail, hold the T-shaped silicone base firmly and remove the metal plug slowly. Do not pull only on the fur, as this may damage the tail or its connection.

How to Use

Choose whether to use the silicone knot plug alone, the metal furry tail plug alone, or the two pieces in their combined configuration.

Clean the selected components and apply a generous amount of body-safe lubricant to the tapered insertable portion. For the silicone knot plug, a water-based lubricant is recommended.

Insert the tapered tip slowly and pause before approaching the 1.65-inch knot. The T-shaped base must remain completely outside the body throughout use.

When using the furry tail through its attached metal plug, keep the tail and its external connection accessible at all times. Do not use any configuration if the external portion cannot be held securely for controlled removal.

Cleaning and Care

Separate the furry tail from the silicone knot plug before cleaning. Wash the silicone plug with warm water and mild, unscented soap, paying attention to the areas around the knot and the connection hole in the T-shaped base.

Clean the metal tapered plug according to its material-care instructions, keeping excessive water and cleaning products away from the fur and its attachment point. Wipe the furry section gently rather than soaking it unless the supplied care instructions specifically state that it is washable.

Allow the silicone plug, connection hole, metal component, and furry tail to dry completely before reassembly or storage. Store the tail loosely to prevent matting and keep the metal and silicone parts separated when not in use.

Product FAQ

Is the furry tail removable?

Yes. The furry tail has an attached metal tapered plug that fits into the prepared hole beneath the silicone plug’s T-shaped base. It can be connected or removed as needed.

Can the knot butt plug be used without the tail?

Yes. The 4.48-inch silicone knot plug can be used separately. Its T-shaped base should remain outside the body for handling and removal.

Can the furry tail be used separately?

Yes. The tail includes its own tapered metal plug, allowing it to be worn without connecting it to the silicone knot plug. Always ensure the tail attachment remains accessible for controlled removal.