Product Introduction

This black-and-red vibrating horse penis sleeve combines an equine-inspired shape with a wearable hollow channel, integrated ball strap, and rechargeable 10-mode motor. Its flared horse-style head creates a bold fantasy profile, while raised vein textures add anatomical detail along the exterior.

The sleeve is available in two sizes. Size S measures 5.98 inches overall with a 4.02-inch hollow channel, while Size M increases to 7.17 inches with a 5.12-inch channel. Both versions contain the same built-in vibration system and can be controlled directly from the sleeve or with the included remote.

Horse-Inspired Head and Veined Shaft

The upper portion features a wide, flared head inspired by the distinctive shape of a horse dildo. It measures 1.97 inches across in Size S and 2.17 inches in Size M.

Several raised vein textures run along the black-and-red exterior, adding definition without covering the shaft in dense or aggressive patterns. The fantasy coloring, flared head, and sculpted veins distinguish it from a conventional realistic penis sleeve.

The head is closed rather than open-ended. The wearer’s penis fits inside the hollow channel and does not extend through an opening at the tip. This structure allows the sleeve to create the full exterior horse-inspired shape when worn.

Built-In 10-Mode Vibration

A rechargeable motor is integrated into the sleeve and provides 10 vibration modes. To switch on the motor, press and hold the power button located on the back of the sleeve, slightly below the head.

After the motor is activated, use the remote control to change between the available vibration modes. The direct power button starts the sleeve, while the remote makes it easier to adjust the pattern during wear without repeatedly reaching for the control on the toy.

USB-Rechargeable Design

The charging port is positioned on the front of the sleeve, slightly below the head. Connect it to a compatible USB power source when the motor requires charging.

Make sure the charging port and surrounding silicone are completely clean and dry before connecting the charger. Disconnect the charging connection before use, cleaning, or contact with lubricant.

Integrated Ball Strap

A stretchable ball strap is built into the lower portion of the horse cock sleeve. It fits around the testicles to provide additional retention and help stabilize the sleeve during movement.

The fit is determined by both the hollow-channel dimensions and the ball strap. Size S has a 1.02-inch-wide channel, while Size M provides a wider 1.26-inch channel. Compare these unstretched measurements with the intended wearer’s dimensions before selecting a size.

Key Features

• Wearable vibrating horse penis sleeve
• Black-and-red fantasy color combination
• Wide, flared equine-inspired head
• Built-in motor with 10 vibration modes
• Remote control for changing vibration patterns
• Rechargeable through a USB connection
• Closed-head hollow sleeve design
• Integrated stretchable ball strap
• Available in Size S and Size M

Size Details

Size S

Total Length: 5.98 in
Head Width: 1.97 in
Hollow Channel Length: 4.02 in
Hollow Channel Width: 1.02 in
Weight: Approximately 161 g

Size M

Total Length: 7.17 in
Head Width: 2.17 in
Hollow Channel Length: 5.12 in
Hollow Channel Width: 1.26 in
Weight: Approximately 230 g

Color: Black and red
Head Style: Closed, flared horse-inspired head
Vibration Modes: 10
Controls: On-sleeve power button and remote control
Charging Method: USB charging
Retention Style: Integrated ball strap

How to Choose a Size

Compare the hollow-channel length and width with the intended wearer’s dimensions.

Size S has a 4.02-inch-deep channel measuring 1.02 inches wide. It offers a shorter and narrower internal fit with a 5.98-inch exterior.

Size M has a 5.12-inch-deep channel and a 1.26-inch width. It provides more internal space, a longer 7.17-inch exterior, and a wider 2.17-inch horse-style head.

Because this is a closed-head sleeve, the wearer cannot extend through the tip if the internal channel is too short. Do not choose solely according to the exterior length or head width.

How to Wear

Fully charge and clean the sleeve before use. Apply a small amount of water-based lubricant inside the hollow channel and around the penis. Avoid using excessive lubricant inside, as this may reduce stability.

Guide the penis slowly into the channel without forcing it against the closed end. Stretch the lower ball strap carefully and position it around the testicles. Adjust the sleeve until the shaft and strap sit evenly without twisting, pinching, or pulling the skin.

The sleeve should feel secure but should not cause pain, numbness, unusual coldness, discoloration, or excessive pressure. Remove it immediately if any of these symptoms occur.

How to Operate the Vibration

Press and hold the power button on the back of the sleeve, slightly below the head, to activate the motor.

Once the motor is running, use the remote control to move through the 10 vibration modes. Test the controls before wearing the sleeve so you are familiar with the power-button and remote functions.

After use, switch off the motor completely before removing or cleaning the sleeve.

Charging Instructions

Locate the charging port on the front of the sleeve, slightly below the head. Make sure the port is completely dry and free from lubricant or residue before connecting the USB charger.

Charge the sleeve on a clean, dry surface using a compatible USB power source. Disconnect it after charging and close or secure the port cover if one is provided. Never operate, clean, or wear the sleeve while it is connected to power.

Cleaning and Care

Switch off the motor and disconnect all charging equipment before cleaning. Wash the silicone surface and hollow channel according to the supplied product-care instructions, taking care around the power button and charging port.

Clean around the raised veins and ball strap, where lubricant or residue may collect. Do not allow moisture to remain inside the charging connection.

Allow the exterior, hollow channel, ball strap, buttons, and charging port to dry completely before charging or storage. Keep the sleeve and remote in a clean, dry place away from direct sunlight. Use water-based lubricant with the silicone material.